? Sintered Porous Getters with Heater — TK172 - 詳細信息
INTRODUCTION：
TECHNICAL CHARACTERISTICS：
|
Active condition: 450℃, 10min, < 1 Pa |
| |
| |
網購平臺：
https://shop64759198.taobao.com
TK172 series is different from traditional TK707 ZrVFe getter. It needs to be heated in vacuum sintering furnace to form sintered body with micro-porous structure, which increases firmness, no loose particles falling off and increased gas adsorption area. The built-in heater can electrically activate the getter, which is convenient and practical. It has significant adsorption effect on O2, N2 and H2. The products are widely used in X-ray tube, infrared detector Dewar bottle, capacitive manometer, argon laser, vacuum circuit breaker, traveling wave tube, which can maintain the vacuum in the tube, absorb harmful gases and prolong the life of the device.
【e-shop：https://shop49tt7106n0960.1688.com】
WORKING CONDITION:
The shelf life of the getters is 1 year. Unopened products must be stored in a dry, clean environment with a relative temperature of less than 60% and a temperature below 35℃.The product should be used immediately after opening. It is recommended to use it in an environment with a relative humidity of less than 60% and a temperature of less than 30℃; it should not be exposed to the atmosphere for more than 24 hours.
重要通知：原“南京善工真空電子有限公司”，根據公司發展戰略，自2017年9月份起，公司生產、銷售等經營活動將轉移到全資子公司：南京善工新材料科技有限公司，簡稱“善工科技”。